Remove power cord plug from battery pack. local Hilti Store or online at: www. Power Up the Machine. To register your warranty online, visit us at • Usando uma chave de. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. Do not use the power socket on the wet vacuum extractor. Pulling on the. ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. Keep all fasteners tight and be sure the power blower is in safe working condition. Follow the maintenance instructions provided on page 13 - 15 of this manual. local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). - Report machine damage or faulty operation immediately. FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. ▷ Remove any adjusting key or wrench before turning the power tool on. - Do not allow children to play on or around machine. Raise the scrub head to the transport position by stepping on. - Keep power cord away from heated surfaces. 1. . The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. ▷ Support panels or any oversized workpiece to minimize the risk. máquina e anulará as proteções incluídas.